PRODUCTS
Hot water boilers for solid fuels 18-150kW
TKK
TKKD
TKLK
TKLK-BIO
TKL Pel
PTK-PIROMAX
-
TKK
Hot water boiler type TKK is designated for heating of homes, buildings, and industrial facilities. The boiler has a large firebox which enables filling with large quantities of fuel. The boiler is designed to have three drafts and also has a water-cooled grid which provides energy utilization up to 90%. It is recommended to build in a three-way or four-way mixing valve to maintain the minimum water temperature of 65-70 C in the boiler what prevents corrosion. A model for liquid or gaseous fuel can be ordered with the purchase of another lower door modified for the burner. For quality work and long durability of the boiler, a good draft has to be provided with a good chimney. In the case of sanitary water heating, the boiler can be connected to the water heater unit but the construction of the boiler does not allow mounting of the unit on the boiler.
Product detalis -
TKKD
Hot water boiler type TKKD is designated for wood and all types of coal. The trait of this boiler is a large firing place with a large slanting door which enables easy handling and filling with large quantities of fuel. The lower smoke exhaust demands a good draft in the chimney, but also has a good advantage because of lesser corrosion. The chimney has to match dimensionally with the SCHIEDEL chimney chart for the solid fuel boilers The fireplace construction enables maximal utilization of up to 90% of the energy. Installed pre-heater of the returning water and the water-cooled grid enables low-temperature corrosion. Eternal surfaces of the boiler are easy to reach during cleaning and maintenance. The boiler can be redesigned for oil or gas fuel. It is recommended for the maintenance of the minimal water temperature 60-70C by installing a three-way or four-way mixing valve. In the case of sanitary water heating, the boiler can be connected to the water heater unit but the construction of the boiler does not allow mounting of the water-heater on the boiler.
Product detalis -
TKLK
Hot water-boiler type TKLK is designated for solid, liquid, and gaseous fuels. The solid fuel is burning on the water-cooled grid, which accomplishes maximal utilization of that energy. The cleaning and maintenance of the boiler are very easy and simple through the firing door and built-in openings at the front and back of the boiler. It is recommended to build in a three-way or four-way mixing valve in order to maintain the minimum water temperature of 65-70C. The boiler can be modified for pellet, gaseous or liquid fuels by purchasing an additional lower door modified for the burner.
Product detalis -
TKLK-BIO
Hot water boiler type TKLK-BIO is designated for the burning of wheat, soya straw bale, baled sunflower and corn stalk, and another agricultural biowaste. The biomass is burning on the water-cooled grid which accomplishes maximal utilization of energy and the smoke gases are redirected what makes the utilization even more efficient. Large doors enable easy and simple firing of voluminous biomass and easy cleaning of the boiler.
Product detalis -
TKL Pel
Hot water boiler type TKL Pel is the most practical choice of pellet boiler. The burning is done in a burner with automatic control which is mounted on the door. By ordering another lower door the boiler can be used for burning solid fuel. The boiler has three drafts which enable high energy utilization with pellet and solid fuels. The cleaning is very easy through the front door.
Product detalis -
PTK-PIROMAX
Hot water boiler type PTK PIROMAX is designated for burning wood logs. A spacious firing place enables filling a large quantity of wood. This boiler provides ecological and economical heating for up to 12 hours without firing. It is produced out of high-quality boiler metal sheets and insulated with mineral wool. The boiler has two burning chambers where the burning of wood happens by principles of gasification with the use of a flue gas fan. Quality electronics with PID regulation maintain fluent fan rotations according to the flue gas temperature. Is recommended to install a water tank buffer minimum of 25liters/kw.
Product detalis
Hot water boilers for solid fuels and biomass 100-1200 kW
TKC
TKC-S
TKLC
TKLC-BIO
-
TKC
Hot water boiler type TKC is designated for the firing of all types of coal. The boiler has a large firing box which enables filling with large quantities of coal. The boiler is designed with three drafts, which enables good combustion and high utilization of heat energy up to 90%. The boiler is made of high-quality boiler steel, with two capes, a pipe heat exchanger, and a water-cooled grid. The boiler has low heat losses because of good insulation. Cleaning and maintenance of the boiler are simple through the back opening and door at the front of the boiler.
Product Detalis -
TKC-S
Hot water boiler type TKC-S is designated for all types of granulated coal size: cube(30-60mm) and nut(16-30mm). The boiler has a large firing box which enables filling with large quantities of coal. At the front of the firing, the door is a coal bunker that contains fuel for 4 hours of continuous work. The coal bunker has an opening at the bottom and the opening and shutting are regulated by a draft regulator and air clap. Since the coal bunker is filled from the top the coal storage has to be above the H level on the drawing. The boiler is designed with three drafts which provide energy utilization up to 90%. The boiler is made out of high-quality boiler steel and has two capes, a pipe exchanger, and a water-cooled grid. The boiler has a very small energy loss because of the good insulation. Cleaning and maintenance of the boiler are very easy through the cleaning doors and the opening at the back of the boiler. A left or right opening version can be purchased depending on the boilers-room space.
Product Detalis -
TKLC
Hot water boiler type TKLC is designated for the firing of all types of wood. The boiler has a large firebox which enables filling with large quantities of wood. The boiler is designed with three drafts, made out of quality boiler steel, two capes, and a water-cooled grid. The boiler has low heat losses because of the good insulation. Cleaning and maintenance of the boiler are simple because there are two cleaning doors at the front of the boiler and a cleaning opening at the back of the boiler. The boiler is set on the frameworks made out of steel profiles which enable easy manipulation with the forklift.
Product Detalis -
TKLC-BIO
TKLC BIO is designated for firing baled biomass and wood. This boiler has a large firing door which enables filling the boiler with voluminous biomass but also with a large quantity of solid fuel. The boiler has three drafts and has a pipe heat exchanger, made out of high-quality boiler steel with two capes and also a water-cooled grid. The boiler has low heat losses because of good insulation. Cleaning and maintenance are very easy through the front doors and opening at the rare side of the boiler. The steel frame enables safe and secure lifting and moving of the boiler.
Product Detalis
Industrial hot water boilers
TKH
TK2H
TK3H
-
TKH
Hot water boiler type TKH is designated for central heating with light fuel oil or gas. The boiler is constructed with two drafts and its maintenance is very easy. Maximal working pressure is 4 bar and the temperature of input and output water is 110/90 C. The doors can be right or left opening for an easy approach to the firing chamber. The boiler has a small resistance on the smoke gases side and on the waterside. The boiler is equipped with a steel frame which enables easy manipulation with a forklift.
Product Detalis -
TK2H
Hot water boiler type TK2H is designated for firing liquid and gaseous fuels. It is designed with three drafts and the heat energy utilization is up to 93%. The boiler is equipped with a steel frame what enables easy manipulation with a forklift. The maximal working pressure is 4 Bar and the water working temperature is 90/110 C. The boiler has a very low resistance on the smoke gases side and on the waterside. Insulation of the boiler maintains minimal heat losses. The boiler is very easy for maintenance and usage.
Product Detalis -
TK3H
Hot water boiler type TK3H is designated for firing liquid and gaseous fuels. The boiler is constructed with three drafts. The maximum working pressure is 6 bars, maximum working temperature is 110/90 oC. The door can be opened either on the left or right side what enables an easy approach to the firing box. The boiler has very low heat energy losses because the insulation is very good. The profile frame enables easy transport and manipulation with the forklift.
Product Detalis
Steam boilers
PKH-SA
PKH
-
PKH-SA
COMING SOON! -
PKH
Boilers type PKH is made in two versions, for saturated steam production up to1 bar pressure and dry saturated steam up to 12 bar pressure, with the combustion of liquid or gas fuel. Boilers of this type are constructed with two drafts (straight flame pipe and smoke pipes). The straight flame pipe is returning what enables high utilization of energy. This boiler is made out of high-quality boiler steel and the construction satisfies all the technical standards. The boiler is equipped with all the necessary armature for continuous automatical work. The boiler is set on the steel profiles which enable easy forklift manipulation.
Product Detalis
Ventilation & Air Conditioning
EUROPAN
-
EUROPAN
Tehnoserv company is a manufacutrer of high quality air treatment devices and systems with capacities 500-100.000 m3/h. Depending on the wanted parameters and other technical characteristics, we are recomending you to choose from three groups of devices:
Modular Ventilation System Appliances
Compact Ventilation Devices
Some examples of our installations and works
We would like to show you all the work that we have done, but it would take us days to do that. Always there for you!
Quick Links
Contact
Fax: 024 554 633
E-mail : tehnos@mts.rs
Hrastova br. 5, 24000 Subotica